wholesale hoops for jewelry making What is the reason for the computer to restart automatically

wholesale jewelry nyc koreatown It may be a hardware problem, or it may be a software problem:

The solution is as follows:
. The load of the CPU is too large, or the work is abnormal. Check the CPU and graphics card heat dissipation, dust removal, oil, or replace the fan.
. The power supply voltage is unstable and the power supply is insufficient. Replace high -quality power supply.
3. Frequent cleaning disk and sorting disk fragments.
1. In the "My Computer" window, right -click to clean the disk formation — "Properties" - "Cleaning Disk" — Check the files to be deleted -OK -Yes.
2. Clear temporary files and start -run — enter "%temp%" - OK.
3. Use the optimization master or super rabbit to clean up the registry and junk files.
4. Turn off some startup programs and start-run-Msconfig --- Started, the general programs except the anti-virus software and input method can be turned off.
5, delete the procedure software that is not used.
6. Sorting disk fragmentation-start-all programs-attachment-system tools-disk fragmentation program-select disk-analysis-fragmentation.
7. Reduce the memory burden, and there should be too many procedures for opening. If there are too many documents that are opened at the same time or too many running programs, there is no enough memory to run other programs, and the procedures and windows that are not used at any time should be turned off at any time.
4. Upgrade graphics card and network card driver, change the graphics card with a higher grade.
5. Increasing physical memory, the current memory is generally at least 2G.
6. Reasonably set up virtual memory.
1. Playing games, virtual memory can be set larger, and the maximum and minimum values ​​are set to 2-3 times the physical memory.
2, the method of virtual memory settings is: right-click my computer-attribute-high-level-performance settings-high-level-virtual memory change-Select the partition of virtual memory (page file) storage in the drive list- -C custom size-set value in "initial size" and "maximum values", then click the "Settings" button, and finally click the "OK" button to exit.
3, the partition stored in virtual memory (page file) must have enough space, insufficient hard disk resources, resulting in insufficient virtual memory. In a computer, it is enough to set up virtual memory in a partition. Set in multiple partitions.
7. Optimized computers such as optimization masters, 360 or super rabbits.

Reading extension KE./link?url=_uwsnn0mt --_qtkva

sanoma jewelry wholesale Pay content for time limit to check for freenAnswer Hello, I am glad to answer your question. The computer crashes for no reason and restarts. Generally, it is caused by the following reasons: 1. The power A socket of the motherboard has virtual welding. It is mainly when the host works normally, move the pinch plug left and right to see if the host will automatically restart. At the same time, it is necessary to check whether the reed in the power plug of 20 stitches should be oxidized, which can easily lead to large contact resistance, poor contact, and cause the host to crash or restart. Sometimes you need to check the connection line at the tail of the 20 -needle, whether it is reliable. Solution: If it is the motherboard welding point welding, just use the electric iron to supplement the welding. Note: When welding the computer board such as the motherboard, hard disk, graphics card, etc., be sure to ground the electric soldering iron well, or unplug the power plug during welding. If it is a problem of power, it is best to replace a good power supply. 2. The CPU problem CPU internal function circuit is damaged. When the second -level cache is damaged, the computer can start, and even enter the normal desktop for normal operation, but it will restart or crashes when performing a special feature, such as the drawing table. , Play VCD, play games, etc. Solution: Try to shield the second -level cache (L2) or first -level cache (L1) in CMOS to see if the host can run normally; it is not just a good CPU for replacement and exclusion. If you can run normally after shielding, you can still use it. Although the speed is slower, it will save money. 3. If a chip is not completely damaged on the memory problem, it is likely to pass the self -inspection (mostly settings are set), but the function will be restarted unexpectedly due to the large amount of memory heat caused by the large amount of memory. Essence Most of the time, the memory is required to report to the police when the memory is damaged, but there are still no failure after the memory is damaged, and there are still failures that do not power over. Solution: It is best to use the exclusion method to quickly determine the fault.

316 steel jewelry wholesale This is most likely to happen: graphics cards or hard disks
It graphics cards can easily cause crash and restart after being overheated. The reaction of the hard disk is very slow, causing crashes, and the possibility of restarting, but it is not very frequent.
This is the two most likely possible. Another possibility is that the power supply has a problem, and the unstable power supply will also appear.
Igly to check from these aspects